基于马尔科夫链模型的脉动装配线运行状态预测

分析了影响脉动生产线运行的因素和状态预测的必要性,提出了基于马尔科夫链模型的状态预测方法。基于马尔科夫链预测理论,对脉动生产线运行状态划分,确定状态转移矩阵,建立马尔科夫预测模型,并对模型准确性进行验证。     

基于三标度法优化宿舍的设计

目的将三标度的层次分析法运用到评价学生宿舍设计方案中;方法通过构建比较矩阵,并运用极差法构造一致性判断矩阵,从而得到组合权重;结果通过组合权重进行再次讨论、对比得出最佳宿舍设计方案;结论此方法比其他方法显得更加简洁、明了,计算量明显减少。     

填加造孔剂法制备泡沫铝及其吸能性能

以尿素为造孔剂,采用填加造孔剂法制备泡沫铝,系统研究了成型烧结温度、孔隙率和孔径大小对泡沫铝吸能性能的影响,在此过程中采用电子万能试验机和数字图像相关(DIC)技术同步测试分析。结果表明:填加造孔剂法可以良好的控制泡沫铝的孔隙率和孔径;泡沫铝的最佳成型烧结温度为650℃,在此温度下,泡沫铝的压缩屈服强度达到10.7 MPa;随着孔隙率的降低,泡沫铝的屈服强度和平台应力逐渐提高,材料吸能性能有显著增强;当孔径小于2.0 mm时,随着孔径的增大,材料的吸能性能小幅提高。DIC技术可以直观的表征泡沫材料力学行为,具有良好的工程应用前景。     

循环吸湿对炭纤维复合材料界面性能的影响

通过对炭纤维增强复合材料进行70、85、100℃下的循环水浸吸湿试验,研究了复合材料在不同水浸温度下的吸湿-脱湿行为规律。同时,对循环吸湿-脱湿过程中的试样进行层间剪切强度测试和动态力学性能测试,并结合扫描电镜观察循环吸湿各个阶段的纤维基体结合状态。结果表明,水浸温度越高,水分的扩散速率越快,饱和吸湿率越大。经过循环吸湿后复合材料的吸湿行为仍满足Fick第二定律,吸湿后层间剪切强度下降,湿热循环次数越多下降的越明显。脱湿后层间剪切强度有所恢复,水浸温度越高造成的不可逆破坏越大,层间剪切强度恢复的越少。干态时的玻璃化转变温度为231℃,吸湿后下降了37℃。     

Theoretical aspects of selecting repeated unit cell model in micromechanical analysis using displacement-based finite element method

Repeated Unit Cell(RUC)is a useful tool in micromechanical analysis of composites using Displacement-based Finite Element(DFE)method,and merely applying Periodic Displacement Boundary Conditions(PDBCs)to RUC is almost a standard practice to conduct such analysis.Two basic questions arising from this practice are whether Periodic Traction Boundary Conditions(PTBCs,also known as traction continuity conditions)are guaranteed and whether the solution is independent of selection of RUCs.This paper presents the theoretical aspects to tackle these questions,which unify the strong form,weak form and DFE method of the micromechanical problem together.Specifically,the solution’s independence of selection of RUCs is dealt with on the strong form side,PTBCs are derived from the weak form as natural boundary conditions,and the validity of merely applying PDBCs in micromechanical Finite Element(FE)analysis is proved by referring to its intrinsic connection to the strong form and weak form.Key points in the theoretical aspects are demonstrated by illustrative examples,and the merits of setting micromechanical FE analysis under the background of a clear theoretical framework are highlighted in the efficient selection of RUCs for Uni Directional(UD)fiber-reinforced composites.     

纳米铝粉的活性评价方法研究进展

综述了纳米铝粉活性的2类评价方法:单质铝含量法和热分析参数法.单质铝含量的测定方法主要有气体容量法、氧化还原滴定法、热重分析法和透射电镜分析法,其中氧化还原滴定法又可分为重铬酸钾滴定法、水溶剂高锰酸钾滴定法、非水溶剂高锰酸钾滴定法及硫酸高铈法.基于热分析参数的活性评价方法主要采用:氧化起始温度、最大氧化速率、一定温度范...     

页轮干式磨削Ti6Al4V合金

进行了Ti6A14V合金锆刚玉页轮和碳化硅页轮的磨削性能试验研究，分析了磨削用量对磨削力、磨削温度和磨削表面完整性的影响。磨削力通过KISTLER9265B测力仪测定，磨削表面温度由NIUSB-621X信号采集系统测得，磨削表面形貌和金相组织由HiroxKH-7700型体视显微仪和Quanta200型扫描电镜（SEM）观察，表面粗糙度由Mahr Perthometer M1粗糙度仪测得，表层显微硬度通过HVS—1000硬度计测定。研究结果表明：页轮磨削钛合金工件表面没有发生烧伤现象，磨削热影响区厚度小于50μm，锆刚玉页轮比碳化硅页轮更适合干式磨削钛合金。     

Integration and calibration of a multi slit spectropolarimeter

Multi-slit spectropolarimeter is a next-generation spectropolarimeter to obtain vector magnetic field information at high spatial, spectral, and temporal resolution for studying the magnetic structures on the Sun. Once developed, it can be used as ground based instrument at solar observatories, also as a space payload for various solar missions. A high spectral resolution is invariably an important parameter for accurate vector magnetic field measurements and faster cadence is required for the study of dynamical evolution of structures (e.g., solar flares, sunspots etc.) on the Sun and hence better understanding on the physics behind their evolution.     

由混合特征对构造对称三对角矩阵

文章考虑一类由混合特征对构造对称三对角矩阵,文中给出了解的存在性和唯一性的充分必要条件,并且给出相应的算法和数值算例。     

基于均匀化方法的轴编C/C复合材料性能预测

把均匀化理论与有限元法相结合,应用于轴棒法多维编织C/C复合材料的性能预测,通过对该材料有效模量的计算和实验验证,表明本方法可以得到较准确的材料刚度性能,为该材料的设计提供了性能预测方法.